44mm Ducted Fan Unit

Our 44mm ducted fan unit weighs just 32 grams.  Stand alone it can generate up to 60 grams of thrust, with ducting fitted the thrust can be increased to 85 grams.  To install this product we recommend you use a suitable 4.8 volt supply.

32mm Ducted Fan Unit

This brushless unit can generate up to 130 grammes of thrust. We recommend powering this unit with a 3s 450 20C li-poly pack (not supplied by us) an ESC and our Time and Speed Controller.

24mm Ducted Fan Unit

This ø24 fan has a static thrust of 40 grams on 7.5 volts at 3.7 Amperes. The weight is 8.9 grams, the outside diameter is 26.5 mm and it's length is 35 mm.

KP00 Flight Unit

Our smallest motor/gear assembly is the KP00, suitable for models with span between 13 and 20 inches.  The unit with prop weighs in at just 7 grams and is supplied boxed with three two blade folding propellers, three each of 1.6mm screws, nuts and washers and three self tapping screws. Can be powered by a single 140 or 200 mAh li-poly cell using our brushed time and speed controller item 918 on the list.  Four styles of KP00 are available each with a different gear ratio and prop fitting method.  Two ratios are available; 2.67:1 and 4.75:1.  The prop shaft is either for bolt on or push on props.

KP01 Power Unit

KP01 is an integrated power unit suitable for 20 to 28 inch span models weighing up to 4.5 oz (125 grams).  Two gear ratios are available, 4.25:1 and 6.25:1.  The 'with accessories' option includes a single li-poly cell and our low voltage protection brushed time and speed controller.

KP02 Power Unit

KP02 is an integrated power unit suitable for up to 42 inch span models weighing up to 9.5 oz (270 grams).  The KP02 motor/gear can be purchased alone or with a battery pack.  The 'with accessories' option includes a single li-poly cell and our low voltage protection brushed time and speed controller.